[Resin Materials] Nylon PA66 production
The industry landscape has pulled off a historic reversal: in 2025 China's PA66 capacity reached 1.57 million tons/year with apparent consumption of 800,000 tons, overtaking the US to become the world's largest producer. It also achieved net exports of 60,000 tons, completely ending the pre-2021 history of over 90% import dependence that had us by the throat. The core support for this reversal was breakthroughs in domestic adiponitrile production by companies like Zhejiang Petrochemical and Tianchen Qixiang, which pushed the self-sufficiency rate of this key raw material from under 10% to over 60%.
Technology has moved into a high-end phase: continuous polycondensation now accounts for 81.4% of domestic PA66 capacity, with single-line capacity reaching 40,000 tons/year. Compared with the traditional batch process, it cuts energy consumption by 30% and narrows batch viscosity fluctuation from ±0.05 to ±0.02, a big improvement in suitability for high-end applications. And the world's first horizontal polymerizer, independently developed by Tianhua Institute, was successfully applied in Liaoyang Petrochemical's 100,000-ton/year plant — a from-zero-to-one breakthrough in core PA66 polymerization equipment that broke the long-standing foreign technical barrier.
The raw material route has completed a revolutionary upgrade: direct hydrocyanation of butadiene has replaced the traditional acrylonitrile electrolysis and adipic acid amination methods to become the mainstream process for making adiponitrile. It achieves overall conversion of ≥99% and single-pass yield of ≥92%, with 28% lower energy consumption than traditional processes. In 2025 domestic adiponitrile self-sufficiency exceeded 60%, which directly crashed the price of imported adiponitrile from 80,000 yuan/ton in 2021 to 17,000 yuan/ton, driving an overall 15%–20% drop in PA66 raw material costs.
High-end demand is driving the industry upgrade: growth in new energy vehicles and 5G electronics is the core driver of the PA66 sector. PA66 use per new energy vehicle has jumped from 5 kg in fuel cars to 12–15 kg, concentrated in core parts like battery pack housings and electric drive insulation components. 5G high-frequency connectors place strict demands on PA66's dielectric constant (≤3.8) and CTI value (≥600V), and the domestic production rate of high-end grades is still under 30%, leaving significant room for import substitution.
7.2 Outlook
Over the next 5–10 years, the PA66 industry will move toward high-end, green, and intelligent development. The core trends are:
High-end: continuous polycondensation will rise to over 90% of capacity, and the domestic production rate of high-end grades (such as low-dielectric grades for 5G and hydrolysis-resistant grades for automotive) will rise above 60%. The core driver is demand growth in downstream high-end applications plus continued R&D investment by domestic companies.
Green: bio-based PA66 capacity will break through, projected to reach 500,000 tons/year by 2030; chemical recycling capacity will reach 1 million tons/year with a recycling rate above 90%. The core driver is the push toward carbon peaking and neutrality goals and tightening environmental policy.
Intelligent: industrial internet platforms will enable real-time monitoring of the whole process, cutting equipment maintenance costs by 20% and improving product quality consistency by 30%. The core driver is the spread of industrial internet technology and companies' pursuit of production efficiency and product quality.
Globalization: domestic PA66 companies will accelerate overseas expansion, especially in Southeast Asia and Europe, to avoid trade barriers and raise global market share. The core driver is domestic overcapacity and growing global demand for PA66.
Comments
0